My Traeger Lil Tex 070 is cold and needs a coat ?

[bigblue]

I see some of the other pellet stoves out their have jackets to insulate them (Yoder)any body know of one to fit the traeger ?

If not i'll have to get a welding blank

 

[tjohnson]

Harbor Freight Welding Blanket works GREAT!

 

[broxn]

Traeger just introduced 3 days ago a line of thermal wraps for all their smokers!

 

[1beezer]

I had a new 3x3 welding blanket delivered to my door for about $11.50 from the big online auction. It covers my 070 like it was made for it.

 

[bigblue]

thanks for imput i checked out the traeger coat and it is pricey and they dont give you much info on it 

 

[broxn]

Typical Traeger ... Lol
Hey breezer, are you attaching the blanket or just dropping it over?

 

[steve22s]

i drapped a blanket over it and forgot to cut exhaust holes..my bad . ruined a whole hopper full of pellets. I figured it would exhaust out the drain pipe enough to work.

 

[gov-]

I bought the biggest fiberglass welding blanket harbor freight had, folded in 4s, it covers the Jr nicely. Just tried to cut holes with a pair of scissors 4 layers thick and it looks half-ass ugly BUT it vents :). We will see if the blanket works miracles. My digital temp setting at smoke is hovering at 160. Outside temp 49 with 98% humidity current as of 5;50am.

Edit: 30 minutes later still on smoke setting and no change. Ive got it draped over the entire thing hanging a few inches below the belly.