BGKYSmoker
Nepas OTBS #242
Original poster
Staff member
Moderator
OTBS Member
★ Lifetime Premier ★
Group Lead
The building phase.
PVC cut to 4'
T on the end cemented.
Cement the cut off 1' to the other end of the T.
Cut the other piece of pvc to 4' and cement the 45* to it.
Cement caps on each end of the pvc.
No cement on the lower part of the T. Drill 1/4" hole and use the bail pin.
Drill for the 2 eye bolts with clevice.
Hammer the 24" spike in the ground bout 12"
RED WHITE AND BLUE
Going to spray paint the pole white to cover the markings on the pvc. Got another to make for my POW/MIA Flag
PVC cut to 4'
T on the end cemented.
Cement the cut off 1' to the other end of the T.
Cut the other piece of pvc to 4' and cement the 45* to it.
Cement caps on each end of the pvc.
No cement on the lower part of the T. Drill 1/4" hole and use the bail pin.
Drill for the 2 eye bolts with clevice.
Hammer the 24" spike in the ground bout 12"
RED WHITE AND BLUE
Going to spray paint the pole white to cover the markings on the pvc. Got another to make for my POW/MIA Flag