MES 340G

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

hooked on smoke

Smoking Fanatic
Original poster
SMF Premier Member
Aug 24, 2013
733
304
Southern California.
Hi,
Does anybody know anything about the Masterbuilt digital electric bluetooth smoker they are calling, MES340G?
The actuall model number is, 20075118.
Unfortunately my 40" gen 1 started acting up yesterday. Temp was 30-40 degrees under the set temp. I checked it with 2 separate tp20's. And the temperature readout was acting strange. I went to their site and saw this model which I haven't seen before. Just curious.
 
Bearcarver Bearcarver I think you may need to start expanding your Mes identification tutorial. LOL Masterbuilt has gotten on an evolution kick recently with hybrids and now this new geometric bluetooth. Gen 3? The model nomenclature maybe hiding the next generation.
 
Bearcarver Bearcarver I think you may need to start expanding your Mes identification tutorial. LOL Masterbuilt has gotten on an evolution kick recently with hybrids and now this new geometric bluetooth. Gen 3? The model nomenclature maybe hiding the next generation.

Psst...Dr. K, It's the model they plan to put in orbit with the Tesla. After all, the driver is going to have to eat....
 
Bearcarver Bearcarver I think you may need to start expanding your Mes identification tutorial. LOL Masterbuilt has gotten on an evolution kick recently with hybrids and now this new geometric bluetooth. Gen 3? The model nomenclature maybe hiding the next generation.


Thanks Kurt---First I saw it. As far as I'm concerned, Gen #3 would be a Fine Name for it.

So far the only major difference I see from the Gen #2.5 to the Gen #3 is about 3" wider & 8" higher. And a Strange Window.

And as for the Hybrids---They'll always have Hybrids, and new ones can jump up at any time, just by mixing various generation parts.

Bear
 
Thanks Kurt---First I saw it. As far as I'm concerned, Gen #3 would be a Fine Name for it.

So far the only major difference I see from the Gen #2.5 to the Gen #3 is about 3" wider & 8" higher. And a Strange Window.

And as for the Hybrids---They'll always have Hybrids, and new ones can jump up at any time, just by mixing various generation parts.

Bear
Is the dimension difference the larger footprint due to the added legs? Or is the body actually larger? I can't tell.
 
Is the dimension difference the larger footprint due to the added legs? Or is the body actually larger? I can't tell.


Hard to say--Could be a little of both.
So far they don't seem to be giving interior Cubic inches---Only exterior overall dimensions.
Somebody will have to actually see & measure one, unless they give more measurements soon.

I haven't seen any prices yet either.

Bear
 
Hard to say--Could be a little of both.
So far they don't seem to be giving interior Cubic inches---Only exterior overall dimensions.
Somebody will have to actually see & measure one, unless they give more measurements soon.

I haven't seen any prices yet either.

Bear
It appears on Sam's Club site, I think it was $329.
 
That is the one through Sam's club I believe. Just the different window.

Something interesting about the big box stores...
Quite a while back now, we bought our first 'Big Screen' TV. We got it at Costco, and it was a name brand.
I went to the Manufacturers web site, but it wouldn't come up. So I inquired about it.
Turned out it is custom built for Costco, and the Model Number has the first to, and last two numbers transposed to designate it is the Costco unit. I don't know if there are other differences besides that.
My new MES 30 JMSS is a Lowe's exclusive model. IIRC the last two digits are xxx-x17.

My last tool partner's Daughter worked at Sears. She could look at the UPC codes of something and tell if it had been bought at a Sears, or elsewhere.
People would bring something in and try and return it to Sears, she'd be called over and she could tell them where the item was purchased by the UPC code. She'd tell them to take it back to XXX store.
 
Something interesting about the big box stores...
Quite a while back now, we bought our first 'Big Screen' TV. We got it at Costco, and it was a name brand.
I went to the Manufacturers web site, but it wouldn't come up. So I inquired about it.
Turned out it is custom built for Costco, and the Model Number has the first to, and last two numbers transposed to designate it is the Costco unit. I don't know if there are other differences besides that.
My new MES 30 JMSS is a Lowe's exclusive model. IIRC the last two digits are xxx-x17.


Yup, Masterbuilt has been doing that for years. That's why I tell people not to ask me questions about which model has this or that. Model Numbers are BS in my book. Sams has had their own model numbers of MES units for at least 6 years, which was when I first noticed it. It could have started a lot earlier. FAIK

Bear
 
Something interesting about the big box stores...
Quite a while back now, we bought our first 'Big Screen' TV. We got it at Costco, and it was a name brand.
I went to the Manufacturers web site, but it wouldn't come up. So I inquired about it.
Turned out it is custom built for Costco, and the Model Number has the first to, and last two numbers transposed to designate it is the Costco unit. I don't know if there are other differences besides that.
My new MES 30 JMSS is a Lowe's exclusive model. IIRC the last two digits are xxx-x17.

My last tool partner's Daughter worked at Sears. She could look at the UPC codes of something and tell if it had been bought at a Sears, or elsewhere.
People would bring something in and try and return it to Sears, she'd be called over and she could tell them where the item was purchased by the UPC code. She'd tell them to take it back to XXX store.
I went to manufacturers site above and it says Sam's club. :)
 
Unfortunately my 40" gen 1 started acting up yesterday. Temp was 30-40 degrees under the set temp. I checked it with 2 separate tp20's. And the temperature readout was acting strange.

It would be a shame to let your current MES go to waste. Have you ever considered doing the simple rewire to it and using an Auber PID Controller?
With a rewire and a PID controller it will actually perform better than when brand new and cost less to do than buying a new MES :)

You can see how simple the rewire of a Gen 1 is here:
https://www.smokingmeatforums.com/threads/mes-rewire-simple-guide-no-back-removal-needed.267069/
 
It would be a shame to let your current MES go to waste. Have you ever considered doing the simple rewire to it and using an Auber PID Controller?
With a rewire and a PID controller it will actually perform better than when brand new and cost less to do than buying a new MES :)

You can see how simple the rewire of a Gen 1 is here:
https://www.smokingmeatforums.com/threads/mes-rewire-simple-guide-no-back-removal-needed.267069/

Yes, I have considered doing that. I am waiting to hear back from Masterbuilt regarding them replacing my current unit as it was 1st reported to them faulty after only 2 months of limited use. I requested a newer model, Gen 2.5 or higher, if there is anything. They said they need to check into it and get back to me. I did share with them that none of my previous digital models lasted more than 6 months before going wiggy. Just my luck.
Well, I'll see what happens.
Thank you for the suggestion and the info it may come in handy in the future.
 
Yes, I have considered doing that. I am waiting to hear back from Masterbuilt regarding them replacing my current unit as it was 1st reported to them faulty after only 2 months of limited use. I requested a newer model, Gen 2.5 or higher, if there is anything. They said they need to check into it and get back to me. I did share with them that none of my previous digital models lasted more than 6 months before going wiggy. Just my luck.
Well, I'll see what happens.
Thank you for the suggestion and the info it may come in handy in the future.

No problem. I figured it may save you some money AND result in an amazing smoker that will last you a loooooong while... provided it doesn't burn up or no one runs off with it :D
 
  • Like
Reactions: hooked on smoke
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky