MES 30 DIGITAL READ OUT

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

PAS

Meat Mopper
Original poster
Feb 7, 2018
262
84
N.E. OHIO
I finally got the new smoker out and seasoned it yesterday and noticed two things. I cant read the digital in the sun without covering it with my hands plus 3/4 of the mesquite chips didnt burn. I put them in for the last 45 minutes of a 3 hour total time.

Any suggestions. Doing my first smoke next weekend. MES 30...too early to type!
 
I too used to have a MES and had difficulty reading the digital screen. I believe that is an issue with most digital screens in the sun regardless of what smoker they are installed on. As dumb as this sounds just put the smoker in a shady area when it is in use.

As far as the Mesquite chips not burning I cannot help you with that because I never used the chip burner. It was too much of a pain to keep feeding it every 15-20 minutes. I solved that problem by purchasing an A-Maze-N tray and tube and my problems were solved for short and long smokes. Now I have adapted them to my other smokers and they have proven to be very versatile. http://www.amazenproducts.com/category_s/12.htm

There are many posts regarding the best approach as to where to locate the A-Maze-N tray and tube in a MES.

I hope this helps,

John
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky