interesting find

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

ribwizzard

Master of the Pit
Original poster
May 10, 2012
2,184
84
Orlando and Tampa Florida
20 inch dia, 1/4" wall , ill put it aside for a future build, but im more interested in the end cap on the left. What a perfect circle guide for the plasma for 18" and 20" circles!

ecd579b3_case.png
 
Well, the ends unbolt, leaving just the 20" tube, it has the one large hole you see in the pic and six small bolt holes. The six small holes are like 5/16" or so and will weld up easy enough, and just use the big hole for the exhaust.

Or it could make a good firebox for a larger cooker.

I also got a nice section of crane boom that will give me four or five nice fire boxes, and two 80 gallon tanks, so I have plenty of hobby material to keep me busy for a while...
 
I'm thinking that would make a Sweeeet little mini smoker!

Maybe have the CC door on the end opposite the firebox with a pull out grate. You could make the door be the top half of the end plate that swings down on a hinge placed across the middle of the end plate.

It would also make a good trash can for the shop!
 
Cool !!!   I'll be ready to see what you come up with.

Gary
 
Don't know what it is, but it looks like something we have pulled from old orange grove well pumps.....


I am sure you will figure something cool out for it.
 
Don't know what it is, but it looks like something we have pulled from old orange grove well pumps.....


I am sure you will figure something cool out for it.
I'm gonna agree with Ribwizzard and say that it is a "~~ Klingon warp generator " and that it will make an out of this world smoker of some kind!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky