Inkbird IBBQ-4T not reading probe

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Mystikal

Newbie
Original poster
Jul 31, 2022
2
0
@Inkbirdbbq

Just opened my first Inkbird product and there is no reading from the probes.
0wQDIFGh-OSetPxemJwW5lY9Zm3zaovLP3HX61ZhwvE.png
 
Welcome to SMF.

If I remember correctly, the cables take some force to snap in. That may fix your problem.
 
  • Like
Reactions: bigfurmn
Welcome to SMF.

If I remember correctly, the cables take some force to snap in. That may fix your problem.

Make sure your probe insert end is clean and dry and make sure there are no kinks in the cable. Good luck

Try pushing a bit harder, might work.
I'd assume, instead of you, that the thread poster might have tried this kind of technique before/after asking the internet.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky