• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

In The Market For Washer/Dryer

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

JckDanls 07

Legendary Pitmaster
OTBS Member
SMF Premier Member
Joined
Sep 10, 2011
Messages
9,944
Reaction score
5,129
Location
Tampa area, Florida.
I know it's not BBQ... But who else would you trust for an opinion on washer and dryers except the best forums on the net...

So we are in the market for some new ones... The wife is tired of buying used (I'm not)... We have always been a big fan of Whirlpool but reading reviews 8 of 10 say stay away...

MOst likely it will have to be from Lowes/HomeDepot... I know they are what I call seconds as is everything they sell But I don't really have much other choice... I will hunt around for somewhere else but I'm not sure there is anything..

But anyways... If I could get y'alls input on this I woulod appreciate it...
 
I still have my 30+ year old Kenmore. They don't make 'em like they used to.

Your so right... That's why I say we WERE always Whirlpool and they WERE made in America... Not the case anymore...

I also meant to ask which ones to definitely to stay away from ??
 
One of my biggest regrets was after my Grandparents passed… not taking and passing up their 1960’s Maytag washer and dryer. They still worked like a champ… I kick myself for not taking them.
 
LG front loader if you’re going new. Nothing beats the old no frills, turn the knob stuff of yesteryear, but if you’re buying through normal channels- LG has been good to us.
 
LG front loader if you’re going new. Nothing beats the old no frills, turn the knob stuff of yesteryear, but if you’re buying through normal channels- LG has been good to us.
Our LG does fine except for the rapid open and close valves. Very loud. And they are susceptible to the rotten egg smell. Well, that was until I started using Oxy Clean. No problems since.

I didn't know Speed Queen made home washers and dryers. I knew they were in commercial applications.
 
Speed Queen pretty much tops all the lists, however, I can't fit a top loader in our laundry room the way it's laid out. Front loader with the dryer stacked on top is all that works in the space.



Our LG does fine except for the rapid open and close valves. Very loud.
I installed water hammer arrestors on the hot and cold inlets. It quieted the noise some on my LG front loader. It still ain't silent, but it quieted it down some.
 
Speed Queen pretty much tops all the lists, however, I can't fit a top loader in our laundry room the way it's laid out. Front loader with the dryer stacked on top is all that works in the space.




I installed water hammer arrestors on the hot and cold inlets. It quieted the noise some on my LG front loader. It still ain't silent, but it quieted it down some.
You don’t even have to have them at the washer, just somewhere in the line, like a gfci. And make sure the valves are open 100%, ours was really bad and a little twist on the valves improved the hammer noise a lot.
 
You don’t even have to have them at the washer, just somewhere in the line, like a gfci. And make sure the valves are open 100%, ours was really bad and a little twist on the valves improved the hammer noise a lot.
It was easiest to add mine to the inlets behind the washer. Lowes has them made to go there. Easy peasy ........ take the hoses off, screw the arrestors onto the valves and put the hoses on them.
 
Our LG does fine except for the rapid open and close valves. Very loud. And they are susceptible to the rotten egg smell. Well, that was until I started using Oxy Clean. No problems since.

I didn't know Speed Queen made home washers and dryers. I knew they were in commercial applications.
They do and they are great, same tech you see in Laundromats everywhere. They are engineered and tested for over 10,000 wash cycles, that's 25 years of typical household use. We love ours.
 
I installed water hammer arrestors on the hot and cold inlets. It quieted the noise some on my LG front loader. It still ain't silent, but it quieted it down some.
I have the arrestors installed, too. Still very noisy. Even replaced the valves a couple years ago. Good machines overall nonetheless.
 
One of my biggest regrets was after my Grandparents passed… not taking and passing up their 1960’s Maytag washer and dryer. They still worked like a champ… I kick myself for not taking them.
I hear ya Justin, I left a Kenmore set at our old house that I bought at the Sear scratch and dent store in 1996, I replaced a could $2 parts and they were still going strong. Moved and got some GE garbage that broke immediately. then Speed Queen came to the house.
 
Speed Queen is worth the extra money. Built tough and easy to work on if you ever have to.

Jim makes a great point I neglected to make. Not only USA made… but made simple. No digital BS… just simple and strongly made!
 
Our LG does fine except for the rapid open and close valves. Very loud. And they are susceptible to the rotten egg smell. Well, that was until I started using Oxy Clean. No problems since.

I didn't know Speed Queen made home washers and dryers. I knew they were in commercial applications.

When you’re in the market for a pair… get Speed Queen and you’ll never look back! USA made, quality is amazing and the warranty is unmatched by any other! Ours came with a 10 year warranty! USA made and a decade of warranty… That’s hard to beat!
 
Jim makes a great point I neglected to make. Not only USA made… but made simple. No digital BS… just simple and strongly made!
Bought our set 2011. Dryer stopped heating earlier this year. Heating coil burned out. 2 screws to remove lower front panel and 2 screws to remove heating element. New heating element 30.00. Less than 30 min to fix.
Probably my fault it burned out. Vent hose basically completely blocked.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky