• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

How do you turn a WSM off?

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

vision

Smoke Blower
Joined
Apr 29, 2011
Messages
131
Reaction score
11
Location
Baltimore, Maryland
On my first smoke I closed all vents when finished. The smoker cooled down but later I noticed water dripping through a bottom vent. Water was condensing all over the unit and was running down into the charcoal pan.

Today I only closed the bottom vents and the smoker is not stopping. So, how are you all turning these off?
 
Turn the kanoodervalve to the left.
 
Shut all the vents. A WSM isn't air tight so if the top vent is open, it can still draft. Even with all of them shut, it can still take a while to die down. There is quite a bit of condensation in most smokers, even with no water in the water pan. Nothing to worry about.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky