Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
I did some more work on my smoker to day. The firebox is 20in dia and 28 in long. I decided to go with the reverse flow. I had a 5in stack and thought it would be great for it. I think sunday I will weld n the smoker to the trailer and add the plates for the reverse flow. I also need to cover the back of the firebox. and make a cover for the stack. I will cut the door for the firebox in the morning also. Im almost there.
I need help with the plating for the reverse flow as you can see I am in close to the firebox. I can go right on top of the angle Then drop a plate from the angle lower maybe a couple inches down. Will that angle last with that direct heat or will I cut that pipe back.
didnt get much done today. I rented a plasma cutter today from Sunbelt toolrental and had to drive 50 miles to get it. Then I get back home and measure everything and it didnt cut. the green light for the pressure never lighted. It was a small 110 miller plasma. So I had o take it back so it took me all morning to get some work done. I cut the door today and make some hinges. I dont know if I should go with a round or square vent If I go with the square i will do a slide to open or close what should I do.
Look GREAT! Like the way you are showing the pictures. Will help me on my project too. How are you going to cap the top of the fire box to get it under the heat plate? Keeps us posted and thanks for sharing.
Almost finished. I made the reverse flow today and made the caps for the firebox. Weld it to the trailer and still need the firebox intake and a couple minor things. I think the biggest job will be the sanding and paint.
not bad for upside down welding. This was my first laying down welding. I pat my self on the back for those welds. i finished the firebox next is the wood rack on the firebox then the intake the door lips and the sand and paint then im done.
had her smoking yesterday while I sanded her down. I didnt get the fire going to hot. I kept it in the chamber around 150. I will coat it with oil then really get it going. I was looking where I need to seal and I am going to put the lips on the doors Sand and paint.