Last edited:
First build
- Thread starter zimmbillie
- Start date
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
pthefree
Fire Starter
Can't speak for iPhone, but my galaxy allows me. There should be a pic icon right above the block to type in
there are some pics. got started on my fire box made it a double door for easy clean out, pic of the tank im going to use 30 gal air comp tank looks rusty but its still solid, and the baffles i had my brother machine for me
Last edited:
smokinbuckeye
Fire Starter
yes you can post from iPhone, in a round about way. Your photos will go to your photostream on your computer then from there just upload them. Easy....unless you have an older iPhone then it wont work. 4s or 5 you will be ok.
rasimmo
Meat Mopper
You can uplaod directly from your phone. Mine would not work until I upgraded the phone to ios6. Now it gives the option for uploading from phone in the mobile version of SMF.
Last edited:
terrymn
Smoke Blower
turn4fun
Fire Starter
wonderwhy
Newbie
- Feb 2, 2013
- 20
- 10
Easy enough to post from Iphone. My girlfriend does it for me all the time LOL.
Looks like a nice build going on. Anxious to get mine started just need to get the oil tank opened up.
I like the double front door on the firebox clever idea, can I steal that from you?
Looks like a nice build going on. Anxious to get mine started just need to get the oil tank opened up.
I like the double front door on the firebox clever idea, can I steal that from you?
No I have one on the bottom too same size as the one on the door. Should be enough? I didn't use the smoker calculator just flying by the seat of my pants. I have a 4" stack for it that is about 4' long. will that be to long or to big in diameter? (Wish the girlfriend would tell me that);)
i solve a lot of my problems after the king shows up or a few
M
Made some progress on it.
happy smoken.
david
Billie, morning and welcome..... If the stack is 4" ID (or a bit larger if it is pipe), the calculator recommends a 12" tall (above the cook chamber) for a height... Take off just above the cooking grate for better heat/smoke flow.... also, if the tank says 30 gal., it may be larger... Soooo, I would start with a stack 16-18" above the cook chamber to be on the safe side... I like the firebox air intakes... should work very well... I really like the double door idea also...
You can make the RF plate removable... Weld some tabs to the tank so it will be removable.. If it is not 100% air tight, not a problem...
I'm in on this build....
Dave
Thank you for all the info. That is good to know I thought the RF plate had to be air tight. That opens the door for some new ideas. Probably wont see much progress this week but hope to get it done this weekend. I will keep posting pics with more progress.
When you look at the RF plate, and the BIG opening at the end.... that path of least resistance should be out the end.... what little escapes, if any, out the side is negligible...
If I make a smoker identical to this one how much do you think I could sell it for? Wondering if there is a few bucks I could make building these. beats the hell out of fixing cars all weekend for side cash.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
Hot Threads
-
Well. Look what Santa dropped off early!
- Started by Steve H
- Replies: 28
- Blowing Smoke Around the Smoker.
-
The Best Egg Salad - Enabler Version
- Started by Chris_in_SoCal
- Replies: 23
- ABT's and all things Appetizers
-
Racoon in liquor store
- Started by normanaj
- Replies: 18
- Blowing Smoke Around the Smoker.
-
Chicago Cracker-Thin 'Za
- Started by Quiganomics
- Replies: 16
- Pizza
-
Reverse searing equipment
- Started by Pigfarmin101
- Replies: 12
- Grilling Beef
