First attempt at Bacon

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

sam3

Smoking Fanatic
Original poster
Jan 24, 2012
817
67
Byram Twp., New Jersey
After reading a lot of good info on here, I decided I would this on my own.
I used Pop's recipe and mixed up one gallon per his instructions. I added some CBP, garlic and onion powder to the brine as well. I did my best keeping the slabs @1.5" thick or less with a deboned pork butt.
I placed them in labeled ziplock bags and poured the brine in. I plan to turn them over once a day for the next ten days.
After that, I will rinse well, air dry and cold smoke for 10 hours with the Pitmaster blend in my Bradley. Keeping temp @100 degrees.
Yes, I used 1 tbls of cure 1 in the brine as per Pop's recipe for one gallon.
BBL
e3y9u5y2.jpg
 
Looks good!  My first attempt at wet brine (Pop's brine) bacon hits the smoke tonight!!! I did a test fry just to make sure and it was fantastic!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Great deal on LEM Grinders!

Latest posts

Clicky