FEC 100 Help Please!

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

tjohnson

Smoking Guru
Original poster
Moderator
OTBS Member
SMF Premier Member
Insider
Dec 29, 2009
5,600
139
Savage, MN
I need some info on the FEC 100 Smoker, and how the controller works.

Factory manual does not help

THX!

Todd
 
I downloaded and read the manual, but it's not very specific........

Can the New IQ4 Digital Controller be set below 180°?

Does the new IQ4 Digital Controller have a "Smoke Setting"?

Todd
 
From my experience, no you cannot set below 180 and there is no "smoke only" setting.

The FEC100 uses the fire pot in the cabinet and so there is an actual pellet fueled fire in the chamber, it is not an element heating/burning the pellets..

I do know you have to "think backwards" to get the lowest temp early for the best smoke benefit and the then set the "hold" temp for your actual cooking temp...

Maybe they've worked on that since its been a year or two since I used one.
 
Todd I did a search on the FEC owners forum for Lowest Temp and Smoke Setting and there is quite a bit of info on both...Good Luck...JJ
 
Last edited:
Sorry Jimmy...

I just assumed it was a link to the manual

Looking at the forum now

I've got a customer who threw the question at me, and thought I would ask SMF

TJ
 
Sorry Jimmy...

I just assumed it was a link to the manual

Looking at the forum now

I've got a customer who threw the question at me, and thought I would ask SMF

TJ


 No worries...I got your back!...JJ
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky