Custom end grain cutting boards

[chopsaw]

So a half inch cove bit would be fine? Is your jig adjustable? Any pics of how you made it? And tips? Thanks

You could try a 1/2 , see if you like it .
I just use a simple " T " profile .


One longer horizontal side screws to work bench ,
The short side is cut to set the distance from side of the board to the groove , also holds the board in place .


The vertical acts as the fence to guide the router .


screws around all 4 sides . I make 2 long sides , 2 shorts for the ends .


Size of the cutting board , and the router you plan to use will give you your numbers .

 

[Tballard169]

You could try a 1/2 , see if you like it .
I just use a simple " T " profile .
View attachment 435416

One longer horizontal side screws to work bench ,
The short side is cut to set the distance from side of the board to the groove , also holds the board in place .
View attachment 435417

The vertical acts as the fence to guide the router .
View attachment 435418

screws around all 4 sides . I make 2 long sides , 2 shorts for the ends .
View attachment 435423

Size of the cutting board , and the router you plan to use will give you your numbers .

Awesome! Thanks

 

[Tballard169]

I'm betting Dad didn't use it---Too Pretty.
I got a cutting board like that, from my Son, for Christmas!!
No way will I cut meat on it !!!
I should tell him to make me an Ugly one to use, but He probably doesn't know how.

Bear

No he does not and it's hanging in his garage

 

[Bearcarver]

No he does not and it's hanging in his garage

That's easy for me to know that, because your Dad's Son who made that is 45.
And My Son, who made my Cutting board is 47.

Bear