• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Cajun Injector O-ring

pit 4 brains

Master of the Pit
OTBS Member
SMF Premier Member
Group Lead
2,222
199
Joined Dec 16, 2009
Anyone know where to get a replacement o-ring for a Cajon Injector? Mine gave up the ghost. I looked at the website but didn't see anything for replacement parts.
 

daveomak

SMF Hall of Fame Pitmaster
OTBS Member
SMF Premier Member
25,744
3,194
Joined Nov 12, 2010
Take the O-ring and plunger to an automotive parts house...  or maybe your local Ace Hardware store... they have boxes of O-rings where you can find a replacement....   probably for about $1.......  If you have a dial gauge,micrometer,  where you can measure the diameter of the ring material that would be a big help...   I'm sure they use a standard O-ring to save cost...  

Or McMaster-Carr has a wide selection....

 http://www.mcmaster.com/#o-rings/=13qjm09

amazon" style="max-width:120px">
 
Last edited:

pit 4 brains

Master of the Pit
OTBS Member
SMF Premier Member
Group Lead
2,222
199
Joined Dec 16, 2009
 
Take the O-ring and plunger to an automotive parts house...  or maybe your local Ace Hardware store... they have boxes of O-rings where you can find a replacement....   probably for about $1.......  If you have a dial gauge,micrometer,  where you can measure the diameter of the ring material that would be a big help...   I'm sure they use a standard O-ring to save cost...  

Or McMaster-Carr has a wide selection....

 http://www.mcmaster.com/#o-rings/=13qjm09

amazon" style="max-width:120px">
Thanks for the info. I was looking at the McMaster food service O-rings but I really didn't want to pay for 25 of them.

I found a new one on Amazon for $14.00

 !! amazon" style="max-width:120px">
It will arrive at my door tomorrow.. Done deal. Thanks again Dave..
 

daveomak

SMF Hall of Fame Pitmaster
OTBS Member
SMF Premier Member
25,744
3,194
Joined Nov 12, 2010
That is a really sweet deal....  If I didn't have 4 injectors, I'd order one.....
 

pit 4 brains

Master of the Pit
OTBS Member
SMF Premier Member
Group Lead
2,222
199
Joined Dec 16, 2009
 
That is a really sweet deal....  If I didn't have 4 injectors, I'd order one.....
Really good quality ( coming from an aircraft mechanic) fit form and function. Way better than the leaky Cabela's Cajun Injector I've been using all this time..
 
tractor supply has o rings
Love TS! Got my GOSM there in Wichita Falls.. 

I really wanted some food grade stuff. We had a few o-rings at work that may have work but they are designed to seal off  hydraulic fluid, not brine...

I couldn't pass up this deal for a pack of free o-rings..
 

Hot Threads

Top Bottom
  AdBlock Detected

We noticed that you're using an ad-blocker, which could block some critical website features. For the best possible site experience please take a moment to disable your AdBlocker.