• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

cajun bandit

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
I have seen them around but never used one. It might not work on a UDS since a Weber kettle is 1/2" smaller. 
 
Last edited:
I am finding that out as Chris Perres ,  from the Cajun bandit co has emailed me to say that the inside of his unit is about 22 7/8"...the outside of my barrel is 23 3/8"   Any sugestions for hooking up a rotisserie?  Sacrificial weber kettle? Metal band on the inside lip?
 
My current plan is another drum. That way I can just move my charcoal basket to another drum and use the same lid but I don't have to cut additional holes in my UDS. You can get a universal rotisserie for around $50. I have the new drum but have yet to start the build. 
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky