• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Building a Smoker

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Joined
Sep 10, 2019
Messages
12
Reaction score
2
So I am building a smoker out of an old wood stove and piping the smoke to the 4 x 4 x 4 smokehouse. The stove will be about 14x12x20, should I go with a 6" pipe or a 4" pipe to the chamber??
 
Last edited:
I personally would go bigger, you could always close the vent some if needed. but that's me, i'm sure some of the more knowledgeable people with builds will be around.
 
When you say chimney... do you mean the pipe going from the firebox to chamber.. or the chimney on top/out of the chamber ??
 
No worries, just looking for some advice before the build rather than post build, which is usually how I roll. Ha ha.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky