• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Amaze-N-smoker

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

coloradosmoker

Smoke Blower
Joined
Apr 9, 2011
Messages
109
Reaction score
10
Location
Centennial, Colorado--15-Miles So. of-- Denver
I was told instead of replacing the bigger wood chip tray that masterbuilt sent me

to get A-maze-N-smoker how does it work

& where do you put it in my masterbuilt 40"

smoker & how does it work never herd of it

& can you put reg. smoking chips in it

Thanks---Ken
 
First I would change that chip tray, and get your MES smoking system working.

Then I would get the AMNS, to complete your perfect setup. You can then fill your AMNS with dust, light it, and put it on the bars to the left of your chip drawer. If your AMNS runs out of dust after 6 to 8 hours (or 3 to 4 hours if you lit both ends), you would then have two choices:

#1   If you want another half hour of smoke, just throw a few chips in your MES chip drawer.

#2   If you want more hours of smoke, just pull the AMNS out, let it cool a few minutes, load it up & light it again.

If you don't get your MES smoking system working properly, option #1 will not be available to you.

Here is a link to find out more:

http://www.amazenproducts.com/

Bear
 
Last edited:
Great advice from the master of the MES
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky