offset

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. D

    !Business help needed. Reverse flow offset size!

    Hey fellow smoking degens. Looking for some advice. What is the size and reasonable price for a commercially viable used reverse flow offset smoker? Something that could handle the needs of a small restaurant. Ideally its trailered to my truck so I can drive to different restaurants and do pop...
  2. JustinLoos

    Installing a Probe Port

    Hi, I have a Horizon 20” Classic offset (0.25” steel) smoker. I’ve been running wired temp probes (ThermoWorks smoke) to my meats. As there is no probe port I run the wires under my cooking chamber door causing a continuous small leak. I run 2-4 probes during a cook. What port do you recommend...
  3. JustinLoos

    Brisket Advice Needed Please

    I just finished my 4th brisket cook. My flat turn out tender and juicy. However, the the point came out tough. Here’s my cooking profile. Any suggestions or advice are appreciated. Prep 10.17 lbs. Costco packer Brisket (choice grade) never frozen 7 lbs. trimmed 60 minutes in room temp Light...
    • JustinLoos
    • Thread
    • beef brisket offset smoked
    • Replies: 12
    • Forum: Beef
  4. J

    My offset smoker project 12/07 - 03/08

    Hi all, Here’s a few pictures of my offset smoker I built, utilizing recycled metal, mainly. The smoker body was leaking rusty water tank from a concrete truck, the 1/4” boiler plate, 6” pipe and some angle iron came from a scrap metal shop ( connections connections) lol I purchased new temp...
    • JoePD
    • Thread
    • build built flow metal offset recycled reverse smoker
    • Replies: 16
    • Forum: Smoker Builds
  5. S

    greyish layer on meat

    Hey guys, I am new to this forum. I am a happy owner of a custom built offset, but I have some minor issues/questions. I'm a long time reader of this forum, but I only recently joined and started posting. I have posted another question on 'smoker builds', but wanted to ask a second one here...
    • Sosolen
    • Thread
    • grey layer meat offset smoke smoker
    • Replies: 9
    • Forum: Wood Smokers
  6. S

    Fire does not seem to burn (smokestack question)

    Hey guys. I have a custom made smoker, I will put all the dimensions below as info, together with some pictures. My question to you guys is, why I seem to have trouble keeping my fire lit with my firebox door wide open. When I keep the top door open, my wood burns crazy, but when I close it...
  7. Daba's BBQ

    Offset Smoker For Sale - Brand New

    I am selling a (literally) once-used Char-Broil offset smoker Excellent physical and working condition Long Island-based Asking $150 or Best Offer Pickup only
  8. T

    Temp Differences once loaded up with Meat

    Hello y'all I've recently completed my offset build which is pictured below. Today I've loaded it up with a few brisket and I"ve noticed that the temp difference from side to side has increased greatly. It used to be within 5-10 degrees side to side now it's closer to 50 degrees difference...
    • Tfrank778
    • Thread
    • issues offset offset smoker offset smoker build offsetsmoker temp temp control temperature issue temperature issues
    • Replies: 11
    • Forum: Wood Smokers
  9. J

    Where to buy 20" stainless eliptical head

    I'm gearing up to build a 20" diameter stainless smoker. One thing I need to find is a 20" diameter stainless steel eliptical head. (Think the top of a propane tank) does anyone have a lead as to where to find one? Preferably in the north west.
  10. L

    Clean smoke, the final discussion

    Hi, I have been researching this for months. I've read about the combustion temperature of wood, watched harry soo explain this in a vid as well as several other people and I still cannot wrap my head around this. Example: Harry soo puts his wood chunks under hot coals and waits to see blue...
  11. Jhump

    Custom Dual Axle Pitmaker Trailer for sale. Delivery possible.

    Open to offers and possible trades/partial trades on things of interest. Delivery to just about anywhere. I honestly dislike parting with this as it was my dream unit. But we sold our home with the climate controlled shop we stored it in and we don't have enough room at our new place. Always...
    • Jhump
    • Thread
    • deep fryer grill offset pitmaker vault
    • Replies: 15
    • Forum: Classified Ads
  12. Hoopers_Smokeshack

    BBQ Mates - BMS-5 Universal Offset

    Hi, Just a quick initial review really with a much better set of pictures... I haven't cooked on it yet, just seasoned it a couple of times now (lit it up to experiment with temp etc too) and I am nothing short of impressed so far. It's huge, especially next to the old char-griller! It comes...
  13. F

    Offset Fuel Burning Cash!

    Hi guys, hope I posted in the right place, but have a question about my experience of upgrading from a weber kettle to an Oklahoma Joe recently. So I start off with a chimney of briquettes and a couple of splits. I have apple, it's well seasoned and all broken down into good 8-10" long 2-3"...
  14. R

    Help me idetify this New Braunsfels smoker?

    Its going for dirt cheap, just need to know if it's worth it or not?
    • Rhyan
    • Thread
    • new braunfels offset offsetsmoker smoker
    • Replies: 5
    • Forum: Wood Smokers
  15. Chris_Ski

    Keeping my offset fueled without billowing white smoke

    Hey all, first post I just purchased a cheap dyna-glo wide offset. During seasoning I used a top down method for the first time laying oak chunks and jealous devil around the base of the burner and topping it with jealous devil from a chimney. I got a ton of white smoke for quite a while and let...
  16. S

    Smoke Stack placement- advise needed

    Hey All, so i'm modifying my drum smoker. it's a horizontal drum and i'm moving the chimney. at the moment, it's at the top on the side. and i'm planning on moving it as per the below. the current location is really not feasible and it needs to be customised. so the template in the image...
  17. MeatPopsicle

    Let the games begin! - 150gal Offset Build

    Started my first offset smoker project this week. It'll have a 150gal cook chamber (85in long - 24in diameter = 35,371cu in), a 26in X 24in X 26in semi insulated firebox (16,224cu in), and planning on having a 6in diameter/40in tall smoke stack (1,131cu in). Learning how to weld/fabricate on...
  18. AmazonDon703

    100 gallon propane tank

    Hey, fellow bbq enthusiasts. So I am having a smoker built from a 100g propane tank, and a 40g tank used for the fire box. Just wondering if any of you have a smoker around that size, and if so how do you like the smoker? Any recommendations, tips or suggestions? So far my main request is...
    • AmazonDon703
    • Thread
    • 100 g 100 gallon 100 gallon smoker offset offset smoker propane tank smoker
    • Replies: 0
    • Forum: Smoker Builds
  19. G

    Gator Pit Party Gator with Rock's BBQ Stoker included pick up in So Cal

    Gator Pit offset smoker is a few years old but in great condition. It has many extras like Adjustable tuning plates, Charcoal basket with T-plates, Brass ball valve grease drain, ash rake, stoker fan blower adaptor w/ probe vent. Check out the website for all the details...
    • glinzay
    • Thread
    • firebox gator offset party pit smoker stack wheels
    • Replies: 4
    • Forum: Classified Ads
  20. J

    Offset Noob / Pork Shoulder 1st Try

    Hey all. So I wanted to reach out and ask a few questions to all individuals that cook with an offset. A few weeks ago I purchased a custom built smoker from someone. They were moving and didnt want to take it with them so I bought it. Thick 1/4" steel!. Got it home and cleaned out old ash along...
Top Bottom
Back
Clicky