Search results for query: Auber PID

...https://www.smokingmeatforums.com/forums/roll-call.133/ Not enough experience with electric units past my Big Chief. Can you convert to an Auber PID ? Not sure if they have a Wi-Fi connect unit. You're in the neighborhood. My winter home is 4 corners or the end of west bound US-192...

...idiot, so there isn't a voltmeter to be found at my house. Is there anything I should look at or do, or do I just take it to the curb? I don't think installing an Auber pid would change anything since I don't have a fluctuation problem - I have a heat problem. Thanks for your thoughts...

That's one thing I absolutely love with the Auber PID. We were below 0° all last week and was still able to cold smoke bacon. Set the Auber at 37° and let it purr for 5 hrs each day. No worry of freezing.

It wasn't too bad. Have the app installed? I would play around with it. You will have some "fun". Wifi only works on 2.4Ghz band so you might have to disable 5G. Also make sure you have decent wifi strength at smoker location. Old router was weak and needed a repeater. Current one (came...

Lookin good, welcome to the PID club!!! If you need any PID tuning numbers should the autotune not behave well, we can whip some up for you. Can't wait to see what you smoke :D

Hello from RI. Auber PID controllers are plug n play with the Bradley,this will help you in keeping your set temps within +/- 1℉ of your set temp.

Time to go Auber PID. Take the controller in the house when done with it.

I have an AW-1520H so it is 15A. I'll give those settings a shot and adjust where I'm putting my Auber probe and see how that effects things after my other tests just to make sure the smoker itself is functioning properly. I did make a new exhaust dead center in the top and my top probe always...

Go here, this fixed mine. Great thread. https://www.smokingmeatforums.com/threads/mes40-wont-heat.313294/

Hi All, Hoping to get a bit of help. I have the Auber AW-1520H V2 and I want to do the MES rewire to replace the controller for better temp control/smoking. I have been following the guide and failed at the first hurdle which is identifying the correct wires to bypass. Mainly because my...

U-bolt modified tube w/mailbox mod and Auber PID used with my MES. GrillGrates for both my Webers.

What are your variables set to? Does your light on the auber flash or stay on constantly? The out of the box setting I believe P=7, I=600 and D=150 was no good for my Mes 40 as well as autotune no good. The auber would flash 20 degrees below set temp and will never get to set temp with 3 ribs...

Have you considered switching to an external PID controller? I bought an Auber years ago that keeps on working. There a lot more options now. The consideration is amperage. My MES-40 can pull up to 10 Amps. Auber handles this. Other controllers may not.

Have a new MES30 with an auber PID controller installed, rewire done properly, PID set from the auber thread here, everything works...but I'm getting different temps between the auber sensor and my Thermoworks x4. The x4 seems to be lagging behind the auber by about 20f but has settled around...

Plus 1 on a pid addition! Unless you lived close to me... I'd love to get a 40 at a decent price, currently have a 30 with auber pid and love it. Ryan

I bought a MES40 and didn't even use it before I bypassed the stock controls and added an Auber PID. The box is great and a smoke tube with a PID makes it a great smoker.

...the MES heating element. The PID will keep sending power to hit the temp you entered in and hold at that temp. 4. The SSR is inside the Auber PID controller already so you don't have to buy or use a separate one. The SSR's job is basically to act as an On/Off switch when the brain of the...

...this correct: - The instructions you give at the beginning of this thread are just to bypass the MES controller? - I then need to get an Auber PID. Can I use this one from Amazon that has wifi: https://www.amazon.com/Wireless-WIFI-Temperature-Humidity-Controller/dp/B06XFV4JT1/ or do I have...

Congrats on the rewire!!! Yeah your braided wires are red and blue. As long as you go smooth white to braided and smooth black to braided, you have completed the rewire! Soon you will be full blown PID operating :D

Welcome from Kentucky! As others said, don't ditch the MES. Just mod it with an Auber PID controller.