Toggle sidebar

Whole Hog Gravity Feed Build

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Remove the Ads for LIFE - 50% Off!
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Amazing and looking Good! In for the finish for sure! Noticed that 1/2" plate, Damn this thing is going to be a beast!! Welders I work with would be Impressed!
 
More progress pics

Got few outer skins on
Water pan welded up with fill and drain holes
Exhaust stacks tack welded and fit up. Will weld in later and build collection boxes around CC outlet to seal in.
 

Attachments

  • IMG_5835.jpeg
    IMG_5835.jpeg
    1.4 MB · Views: 22
  • IMG_5837.jpeg
    IMG_5837.jpeg
    1 MB · Views: 15
  • IMG_5836.jpeg
    IMG_5836.jpeg
    1.5 MB · Views: 15
  • IMG_5838.jpeg
    IMG_5838.jpeg
    1.1 MB · Views: 14
  • IMG_5839.jpeg
    IMG_5839.jpeg
    1.9 MB · Views: 15
  • IMG_5840.jpeg
    IMG_5840.jpeg
    1.3 MB · Views: 15
  • IMG_5841.jpeg
    IMG_5841.jpeg
    1.4 MB · Views: 22
  • Like
Reactions: luvcatchingbass, Fueling Around, seenred and 1 other person
You must log in or register to reply here.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Similar threads

L
Starting to build 20x54 offset, need help to do it right
Replies
0
Views
2K
Side Fire Box
lynx85
L
golfpro2301
Need Design help on custom patio build
Replies
4
Views
2K
General Discussion
golfpro2301
golfpro2301
smokin monkey
Charcoal Gravity Feed Build.
Replies
7
Views
13K
Other Builds
smokin monkey
smokin monkey
bsimms89
Gravity Feed Smoker build Questions
Replies
2
Views
8K
Other Builds
bigjohnsbbqnv
bigjohnsbbqnv

Latest posts

Hot Threads

Top Bottom
Back
Clicky