What gage of extension cord.

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

dribron

Meat Mopper
Original poster
Apr 9, 2010
214
10
Elk River MN
Hey, all I was just wondering what everyone here felt was a good gage for an extension cord. On the back of my smoker it says, 120v, 1500watt, 12.5 amp. I have a possible 14ga that is rated for 13amps... I'm guessing I should go for over kill here and get somewhere in the 12gage area. Still wanted to get some info from the pro's.. Thanks, Duane
 
Use a 12 Gauge cord. That's what I use for my MES. and have never had a problem with it. The breakers are rated at 80% of their max value to trip. Heavier is better. How far the cord is makes a difference also. The longer the cord, the higher value it needs to be. I have a 50 foot # 12 and no worries.
 
As long as you're not running the extension cord a long distance the 14 ga should be fine. In fact 14 ga should carry 15 amps, but if you're uncomfortable then go with 12 ga.
 
Technically, the 14 gauge will carry the amperage, if, it doesn't have to go too far and is rated (by cover) for the service. Translated to plain english: You using this cord outside? Is the cord rated for outside use? Take a good look at the rubber coating on it, is it nice and thick? Does that little tag on it that tells you its rated UL also say for indoor use only or does it say indoor/outdoor use. How far is the receptacle from where you plan to use it? 50 to 100 feet? You'll need a minimum of 12 gauge rated for outdoor use. Closer than 50 feet, use 12 gauge anyway. If you're using it outside, you are plugging it into a GFI protected receptacle, right? Do it right the first time, then enjoy the smoking process with no concern for cheaping out on the cord. If you have a cord you've been using for awhile, give it the heat test: Let it be in use for awhile, then touch the cord gently, then lay it in your palm. Is it hot, or even warm? Hot? Get a bigger wire size, the cord you're holding is not long for use. Warm? I'd be suspicious, but then I've been known to be darn careful around electricity. Now, I'm retired from that trade so I can enjoy the benefits of that carefulness.

Electricians love it when people skimp of safety features, we call it job security.
 
No, it is indoor outdoor. It was bought for another pourpose last year with the intent that I may need to go out doors with it. And I know that 14ga will be fine under normal conditions. I was just wondering what the norm was here.. Thank you all so much!
 
It is always advantages to over engineer than to engineer when it comes to electricity. I was an I.B.E.W. electrician for 28 years of my life, and we always over engineered our projects.
 
I am using a 10ga 25 ft cord I bought at Harbor Freight for $35.00 and it is plenty heavy... Overkill is better than Underkill...
 
i have 1500 watt units and use 14ga up to 25' no problem.
over kill is ok but if you have a good cord and it does not get warm to the touch stick with it
PDT_Armataz_01_34.gif
 
As others have said, bigger is better and shorter is better. Best is not to use one at all if possible. But if you have to, hold the cord where it plugs into the outlet, if it gets warm to the touch, keep an eye on it. If it gets noticably hot = big red flag! "DANGER, WILL ROBINSON!"
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky