• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Using a upright freezer as curing chamber

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

old jim

Newbie
Joined
Oct 14, 2015
Messages
5
Reaction score
10
Location
Macy Indiana
Hi,

  I have a chance to buy a newer upright freezer cheap, I was wondering dose anyone see a problem using it for a curing chamber or has anybody ever used one. I will have a separate temperature control on

I was getting ready to cut out freezer on my fridge and my neighbor offered me the 21.2 cu freezer. I appreciate any replies.

Thanks Jim
 
It depends on your freezer.  My ancient upright has the coils built into the shelving racks, which makes them non-removable. This makes it impossible to hang anything longer than about 8" long.

I don't know if laying on the cooling coils would affect anything.

The freezer you're looking at may be different.

Don
 
If the selves can be arranged as needed should be good to go...JJ
 
,I​H

 Thanks you for responding My freezer is a newer one and doesn't have in cooling in the shelves.

Thanks
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky