Ultimate Breakfast Fattie w/Q-View

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

prebeck32

Newbie
Original poster
Aug 25, 2010
5
12
For this fattie, I decided to treat some members in my church's small group to a special treat! Meeting for brunch, this was my breakfast contribution. I started out with scrambled eggs, 2 diced jalapenos, 1/4 onion and a bag of sharp cheddar (seen below).

bdf843ec_DSC_0730.jpg


Next, I added in some tater tots right out of the oven!

7a1c3e1d_DSC_0731.jpg


While mixing and letting simmer, I flattened my "hot" sausage into a freezer bag.

c14da132_DSC_0732.jpg


After the sausage was prepped, next came the bacon weave.

0931019a_DSC_0735.jpg


After the bacon was completed, I used my own, newly-made fattie piston (all the credit goes to cowgirl) and packed in the eggs, tater tots, onions, jalapenos and cheese into a 2" PVC pipe.

7f58d21d_DSC_0750.jpg


Another shot of it compressing the fattie guts!

1bb2c792_DSC_0751.jpg


After being compressed, I let everything cool into the refrigerator for a couple of hours before final assembly. First, I positioned the flattened sausage onto the bacon weave.

e78b241c_DSC_0736.jpg


Next, I pushed out the fattie piston onto the sausage...I was amazed at how everything stayed together and remained compact!

cf5ca680_DSC_0737.jpg


Another angle with more tater tots!

fbaa565b_DSC_0739.jpg


Next step was to wrap, seal and cool overnight.

61549c68_DSC_0740.jpg


I smoked the fattie for approximately 4 hours anywhere from 250-280 degrees using apple wood. This was the final product after pulling it off the smoker. We like our bacon crisp and well-done!

506902b3_DSC_0745.jpg


Delicious and moist inside! Everything went together perfectly! Thanks for looking!             
drool.gif


f4962df7_DSC_0746.jpg
 
  • Like
Reactions: liquidsteel
that a great looking FATTIE !!!!!!!!

I made one of them fattie piston 6 months ago .

still need to try it out . every time I make a fattie

i just throw it all together and roll it up.

i need to try it out and see how good it works.
 
It all looks great - Glad it came out well for you
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky