Thermometer for Weber Kettle Grill

[Compulsive Smoker]

Does anyone know of a good way to install a thermometer on a 22" weber kettle grill?

Maybe a kit I could buy or something?

 

[JckDanls 07]

I would get one that's adjustable/calibratable and has about a 2" long stem... Drill a hole in the lid by the handle... Slide it in there... Then use a remote thermometer to calibrate/adjust the lid thermometer to what the remote is reading at grate level...

 

[Compulsive Smoker]

I would get one that's adjustable/calibratable and has about a 2" long stem... Drill a hole in the lid by the handle... Slide it in there... Then use a remote thermometer to calibrate/adjust the lid thermometer to what the remote is reading at grate level...

Thanks Keith! I kinda had the same idea, just wasn't sure if there was a specific kit for doing this or not. I was a little worried about the thermometer wanting to fall our every time I take the lid off, but I did find one on Amazon that has a wing nut on the bottom side of the lid to keep that from happening, so I think I'll go for that one.

 

[chopsaw]

Does anyone know of a good way to install a thermometer on a 22" weber kettle grill?

Is this an old kettle that doesn't have a lid therm ?

 

[Compulsive Smoker]

Is this an old kettle that doesn't have a lid therm ?

Not that old, I bought it from Lowe’s maybe 2 years ago. It is the original kettle, which does not have the lid therm. I bought it cuz it was cheaper lol

 

[ifitsdeadsmokeit]

Use a wireless. There are several to choose from. I have the thermoworks rfx. Meater, fireboard, therm pro, and inkbird are others of various quality and accuracy.

 

[Compulsive Smoker]

Use a wireless. There are several to choose from. I have the thermoworks rfx. Meater, fireboard, therm pro, and inkbird are others of various quality and accuracy.

Is there a wireless that you can let mounted in the lid?

 

[ifitsdeadsmokeit]

You would have to rig something to hang the holder from the lid. They have clips that clip into the grate.

 

[Compulsive Smoker]

You would have to rig something to hang the holder from the lid. They have clips that clip into the grate.

I have a thermpro tp20, with 2 probes, so that would probably work.

 

[chopsaw]

It is the original kettle, which does not have the lid therm.

OK . I didn't know they sold them without a therm .
You can buy the stock parts from Weber . Either with or without the bezel .
There's a few different types . One goes in the lid handle , or the ones that go in the lid .
Of the ones that go in the lid , some have a clocking tab that goes into a slot that keeps it from spinning . That way the top of the therm stays at 12:00 . So that one needs a hole , and a slot next to the hole .
As far as adding one that has a longer probe , you have to be careful with that because it can come in contact with the food on the grill . So keep that in mind .
Tel true is a good after market choice , because they are adjustable . They're not cheap though .
I personally have never had any issues with the stock Weber dial therms .

 

[912smoker]

I have a thermpro tp20, with 2 probes, so that would probably work.

That's the same one I use and always dependable. Just hang the base on the kettle half handle.

Keith