Tandoori Beer Keg

Discussion in 'Smoker Builds' started by smokin monkey, Apr 15, 2015.

  1. smokin monkey

    smokin monkey Master of the Pit Group Lead OTBS Member SMF Premier Member

    Tandoori Beer Keg

    Not a smoker but a build anyway.

    Job down at my local brewery and managed to get hold of a Stainless Steel Beer Keg, thanks John Tower Brewery!

    Whipped the top off using one of my new toys, Plama Cutter

    Cut air hole two inch up from the bottom

    1 1/2 in lenght round stainless steel to form air channel. Held in position to tack weld.

    Tack welded to the inside.

    Used the cut out for the air hole hole to blank the filling hole

    Have filled the bottom with 2 inch of 5 parts Vermiculit to 1 part cement and the sides 1 1/2 inch of same mixture.

    Drying out at the moment. More pics to follow.

    Smokin Monkey�

    Back to The Smokin Monkey Cook Book http://www.smokingmeatforums.com/t/253497/the-smokin-monkey-cook-book
     
    Last edited: Oct 29, 2016
  2. I'm confused what you're building....but I'm watching!
     
  3. timberjet

    timberjet Master of the Pit

    Are you building a Bubba Keg? I wish I could get my hands on a good keg. I want to do a bit of home distilling.
     
  4. smokin monkey

    smokin monkey Master of the Pit Group Lead OTBS Member SMF Premier Member

    It's an Indian Charcol Oven.


    Smokin Monkey �
     
  5. timberjet, check your pm's
     
  6. Very cool. Seems like a relatively simple build. 
     
  7. timberjet

    timberjet Master of the Pit

    You should check out chef willy's posts he put a rotissere on top of that same kind of setup for chicken. Could be another use for that neat cooker.
     
  8. smokin monkey

    smokin monkey Master of the Pit Group Lead OTBS Member SMF Premier Member

Share This Page