• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Tandoori Beer Keg

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

smokin monkey

Master of the Pit
OTBS Member
SMF Premier Member
Joined
Oct 27, 2013
Messages
2,356
Reaction score
278
Location
Sutton In Ashfield, UK
Tandoori Beer Keg

Not a smoker but a build anyway.

Job down at my local brewery and managed to get hold of a Stainless Steel Beer Keg, thanks John Tower Brewery!

Whipped the top off using one of my new toys, Plama Cutter
Cut air hole two inch up from the bottom

1 1/2 in lenght round stainless steel to form air channel. Held in position to tack weld.

Tack welded to the inside.

Used the cut out for the air hole hole to blank the filling hole

Have filled the bottom with 2 inch of 5 parts Vermiculit to 1 part cement and the sides 1 1/2 inch of same mixture.

Drying out at the moment. More pics to follow.

Smokin Monkey[emoji]133660013031[/emoji]

Back to The Smokin Monkey Cook Book http://www.smokingmeatforums.com/t/253497/the-smokin-monkey-cook-book
 
Last edited:
You should check out chef willy's posts he put a rotissere on top of that same kind of setup for chicken. Could be another use for that neat cooker.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky