- May 12, 2019
- 12
- 22
Hello everybody and thanks for the great forum! English is not my native language so bare with me. I used Feldon's BBQ Pit Builder Calculator and material is all stainless steel.
I have been building my first smoker for couples of years and hopefully i get it done soon. Unfortunately i lost some pictures but not all of them. I will add more pictures as the build progress. Firebox build pictures are gone.
I start with piece of of 3mm sheet and my friend rolled it into the shape of the cylinder at work
The ends were cut with a laser and are 5mm thick
Cuts and RF plate
Building the door
Custom made
Hinges and Chimney hat?
Cant remember what this is called but i found the design from here :)
Current situation
I have been building my first smoker for couples of years and hopefully i get it done soon. Unfortunately i lost some pictures but not all of them. I will add more pictures as the build progress. Firebox build pictures are gone.
I start with piece of of 3mm sheet and my friend rolled it into the shape of the cylinder at work
The ends were cut with a laser and are 5mm thick
Cuts and RF plate
Building the door
Custom made
Hinges and Chimney hat?
Cant remember what this is called but i found the design from here :)
Current situation