Sausage Racks

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

cmm5350

Fire Starter
Original poster
Aug 12, 2013
40
10
North East Pennsylvania
Where can I buy a sausage rack for the smoker to keep the sausage up off the grate?  I'd prefer to buy one locally since Im doing it this weekend but if I have to wait that's alright too.  I can't seem to find one. 

Also while we are talking about racks, does anyone use rib racks?   Do they serve any purpose?  
 
Does your neck of the woods have a TSC store?  if so, go see if they have one I saw a Masterbuilt sausage hanging device in our TSC about a month ago. I is about a foot square, made of stainless steel rod/wire.  it had 3 or 4 rods crossing it and on these rods I think 4 or 5 on every rod, hooks. Now if you se this device on your grate, hooks down, they would have the bottom of the hook about 1 1/4 inch below the grate.  I had to take this device to till to find out what it was.  It was Masterbuilt item # 20090113

music-064.gif
   
canada-flag-14.gif
 
Last edited:
My MES40 measures 19 3/4 inches wall to wall. I had Lowes cut 1 inch pine dowels to 19 inches, same width as the racks, and used a knife to make a flat spot on the ends. The 4 dowels lay nicely on the top of the rack frames and cost less than $10. Each easily holds 15Lbs of sausage...JJ
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky