Reverse calculation check

[Bigmark1127]

Please help I am ready to start building just want to double check all the calculations they are as follows
35.5 x 47.5 inches all measurements are in inches
CC volume in cubic inches 47,510
fB/CC opening 190 cubic inches 34 x 8.5 inches
Area under RF plate 190 cubic inches 8.5 inches
Area open at end of RF plate 190 cubic inches 8.5 inches
Minimum volume of FB 15178 cubic inches 36 w x 24L x 19 h inches
FB air inlets 15.678 12.54 square inches at bottom 3.14 inches at top
ESV above CC 1045 cubic inches 2 - 7 inch x 41-1/2 inch stacks

Please let me know if I need to change anything
Thanks in advance for all your help
BigMark

 

[AllTuckerdOut]

Hey Bigmark1127 - check out this thread - I made a calculator website for this!

https://www.smokingmeatforums.com/threads/offset-smoker-calculator-website.286738/#post-1953524