replacing elements

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

fendrbluz

Meat Mopper
Original poster
Feb 16, 2014
208
11
Oakland Park ,Florida
Was trying to smoke some ribs sunday and my bradley wouldnt get over 210 for like 2hrs then it shot up to 250 then back down to 200 ended up having to finish off in the oven anybody ever see this maybe I need a new element?
 
Thanks for the reply I called customer support and they said to take a wire brush and clean the thermostat seems to have worked so far thanks again
 
If you get on the Bradley forum there are plenty of threads as to how to improve these smokers.
The brackets that hold the elements have enough room to add a 2nd unit. If you have a bit of electrical knowledge, hooking it up is simple.
I have since moved up to a Traeger as I found the Bradley electronics very finicky for Ontario weather.

Good luck.

Lumpy
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky