portsmoker project 2014

[portsmokers]

Here's my project

 

[shoneyboy]

 

[daveomak]

Click the box to the LEFT of the PAPER CLIP, in the reply box, to upload you pics from your computer....

 

[portsmokers]

20140929_192544.jpg

• portsmokers
• Oct 1, 2014

Here my build coming along

 

[JckDanls 07]

always interested in a brick and block smoker.. I'm in ...

 

[portsmokers]

There you go guys tell me what you think. Im put in a angle beam support to carry up the load to my chamber . But im also hide the angle beam with the firebrick . Then form the outside with normal brick.

 

[portsmokers]

always interested in a brick and block smoker.. I'm in ...

 

[dirtsailor2003]

Looks like a good start! I'll be sticking around to see where this goes!

 

[portsmokers]

nub7G1v3BdEATECJpY8v9YaH3vBDq5pYUBSf6u7qlT6e8hAY0c

• portsmokers
• Oct 1, 2014

This is the motor im using . flue set its amazing.

 

[portsmokers]

20140827_202823.jpg

• portsmokers
• Oct 1, 2014

i went from this start of project . To the recent one i uploaded. I been almost month and 10 days on this project. Had a lil problem beacuse it had a limestone pad on top covering the blocks . And i found out lime stone no good so i had to break it a part and start from firebrick finsish with fire brick complete the cap it off then do 2 nd normal brick on the outside. That's my plans

 

[portsmokers]

20141004_125657.jpg

• portsmokers
• Oct 4, 2014

here an updated on my project .

 

[portsmokers]

20141008_183347.jpg

• portsmokers
• Oct 9, 2014

got the angle beam going in.