• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Pork butt

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

kmack918

Fire Starter
Joined
Jun 27, 2013
Messages
31
Reaction score
10
Location
Sand springs Oklahoma
The bark on my pork butt had plenty of flavor (smoke and seasoning)! But the inside lacked flavor. What can I do to change that?
 
Sorry didn't mean to reply to you here. I'm soooo computer/I-phone illiterate. But since I am here, I do brine my pork butt before I rub and smoke it. What I do is, brine in bottled water(spring) with molasses, and pickling salt for about 24 hours before I apply rub.
I have, and still do, ask what can I do to make it better. A buddy of mine who, when he has 'get togethers' tells me not to change a thing. He is one who goes out and gets pulled pork from a local 'smoke- house' we have nearby.
Try it out, but don't use too much salt. First time I did it, it was way too salty - the whole way through.
Recipe calls for:
8 ounces molasses (I used 3/4 cup)
12 ozs. pickling salt (I used 1.5 cups) - pretty salty this way (you could cut back some - up to you though on how salty you want it)
2 quarts bottled water (again I used 8 cups)
This works good for brine with a 6 to 8 lb. butt.
P.S. this has some of the salt cut back already
I guess you can use whatever rub you got with this.
I'm not going to take credit for brine, found it on Internet
Good luck!![emoji]128022[/emoji]
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky