PID Time

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

hooked on smoke

Smoking Fanatic
Original poster
SMF Premier Member
Aug 24, 2013
797
330
Southern California.
Sorry if this is in the wrong forum..
I have a decision to make and could use some advice.
I will be doing a rewire on my Mes40 gen1 and adding a PID. I am considering one of these 2 Aubers.
Being new I am not sure which model to choose.
1) WSD-1200GPH

2) WSD-1500H-W
Is the WSD-1500H-W worth the extra $ ?

JC in GB,
Are you still working on your prototypes?

Best regards.
 
Last edited:
  • Like
Reactions: Brokenhandle
This is the one I and many other members use


That is a good one especially if you want the ramp feature ...

I built my own using an earlier version of this one... https://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=4
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky