Oklahoma Joe Highland Smoker

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

boomerangg22

Smoke Blower
Original poster
Aug 24, 2016
95
29
Iowa
I just bought a Oklahoma Joe Highland 879 sq in Smoker. Was pretty excited about it. I got it for 268 at walmart. Then i read the review on it here, wish I would of read it before hand. Oh well I guess I'm no pro so hope it'll do me good.
 
Last edited:
Don't fret, that's a good smoker to start with. i have used much worst smokers and made good eats. It is gonna leak smoke unless you seal it up with some mods. but it will teach you how to do some offset smoking. I dont know if this is your first smoke or are you graduating up a little but i think there are plenty of people who make good food on an OKJ. for the price point it actually pretty good piece of equipment. keep it a year or few and get really good with it and when you decide to go with higher end (Yoder, horizon, custom, etc,) you wont near as much learning curve.

Make sure you search on here for Oklahoma Joe's mods and you will be good shape.

Congrats, don't be down you got a new smoker, and that's always a good day!

Happy Smoking

phatbac (Aaron)
 
 
Plenty of guys on here with that smoker.

It's the pitmaster, not the pit that makes good Q!

Al
yeahthat.gif
 
Thanks everybody for the reassurance but I canceled the purchase. Wife wasn't to happy I bought it with Christmas and all, made things real tight. Hopefully I can save up and get a better one this spring. Getting laid off in two weeks for the winter, I'm hoping to get some smoking in. 
439.gif


Guess the brinkman will have to do.
 
I know you cancelled your order but maybe this will help for when you are looking again.

I love my OKJ Highland Smoker. I especially love I found it on a winter clearance at Walmart for $150.00. After a few Mods it works great and turns out some amazing BBQ. I agree with what SmokinAl said above, it is the pit master, not the pit. Not that I am a pitmaster or expert by any means, I'm still learning on every smoke, but there are guys out there who build smokers out of old dishwashers and refrigerators and turn out some amazing results. Remember where BBQ started, poor people with nothing, smoking cuts of meat that nobody else wanted to eat, on whatever they could piece together to do it.   

As far as Mods on mine, I moved the smoke stack down about 6" to just below the grate. Used fire rope (wood stove gasket) on all the firebox seals, put lava lock gasket on the cooking chamber, and added a stainless steel heat plate that holds a water pan at the outlet of the fire box. It maintains a pretty even temp across the fire box now. Fortunately I work at a company that has a metal shop and a welder.  

I will say that smoke management at lower temps can be a bit tricky, but once you get the hang of it  works great. I’m going to post though and see if anyone has any tips.
 
 
I know you cancelled your order but maybe this will help for when you are looking again.

I love my OKJ Highland Smoker. I especially love I found it on a winter clearance at Walmart for $150.00. After a few Mods it works great and turns out some amazing BBQ. I agree with what SmokinAl said above, it is the pit master, not the pit. Not that I am a pitmaster or expert by any means, I'm still learning on every smoke, but there are guys out there who build smokers out of old dishwashers and refrigerators and turn out some amazing results. Remember where BBQ started, poor people with nothing, smoking cuts of meat that nobody else wanted to eat, on whatever they could piece together to do it.   

As far as Mods on mine, I moved the smoke stack down about 6" to just below the grate. Used fire rope (wood stove gasket) on all the firebox seals, put lava lock gasket on the cooking chamber, and added a stainless steel heat plate that holds a water pan at the outlet of the fire box. It maintains a pretty even temp across the fire box now. Fortunately I work at a company that has a metal shop and a welder.  

I will say that smoke management at lower temps can be a bit tricky, but once you get the hang of it  works great. I’m going to post though and see if anyone has any tips.
I was in Walmart today and they still have it. It is listed as out of stock on line. Maybe I can keep an eye on it and it'll get marked down too. 150 is sure lot better then 268. Been looking and looking at smokers and dang they are costly. I wanted one that runs on pellets but they are way out there.  
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky