New build completed…amost!
- Thread starter Chad Peterson
- Start date
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Right on thanks! It’s been awesome so far. Gonna do 6 racks tomorrow with the new door/different air inletsThat's going to put out some amazing food! Nice work
Good morning, Chad and welcome from North Carolina.
That's some nice work you've done there. Is that a Millermatic 255 in the background? And is that what you welded this with?
That's some nice work you've done there. Is that a Millermatic 255 in the background? And is that what you welded this with?
Good morning & Merry Christmas! Thanks for the good words bud! It’s the Millermatic 235
…I have the 255 aswell but rarely use it lol! Love the 235! Yeah I used it for this project
Good morning & Merry Christmas! Thanks for the good words bud! It’s the Millermatic 235
Ahh. I have the Multimatic 255 and really like it but still want to be better at outside corners in 1/4" plate before I'm comfortable tackling long joints as visible as the firebox and cook chamber end plates. When you have a few minutes I'd be grateful for some insight into your parameters and what wire your using (I'm guessing ER70S-6 from the silica islands?)
I own my gas cylinders and had to wait to empty one of my 300 CF 75/25 cylinders to get it refilled with 90/10 Argon/CO2 so I can give pulsed axial spray with .045" ER70S-6 a try. I haven't been as diligent as I should be and seeing your smoker is giving me some motivation to get to work on one. I have five propane tanks sitting in the edge of our woods for smokers and one is currently filled with Dawn dish detergent and water soaking so can snip the end off it anytime.
Best regards,
I finished the new door Christmas Eve & ran it yesterday smokin 6 racks. Pretty noticeable improvement! Shout out to Daveomak for the air inlet suggestion that I followed exactly. It maintains 225 with the bottom inlet about 1/4 open & can crank it up nice & easy going further. Still playing with the upper inlets, but it’s working very good .
.Attachments
Wow, beautiful piece of work there, absolutely gorgeous! Welcome from Gilbert, AZ! RAY
I like that overlay door a bunch. It has enough room for a fair size window so I'll have to give that some thought.
bbqfoodexpress
Newbie
- Jan 25, 2022
- 18
- 21
I’m beyond impressed. I’m not an expert but I had twin uncles that were master welders. What I see is crazy impressive. Wow. Just wow. Everything about this is incredible. Your great-grandkid’s grand kids are going to be fighting over that heirloom.
Man thanks for the good words brutha! I love fabricating…was always fascinated as a young kid & got on it at a young age . I’m going to make another one this year, I don’t think I’ll change much, it works so good…maybe just a bit longer for the barrel but that’s it
. I’m going to make another one this year, I don’t think I’ll change much, it works so good…maybe just a bit longer for the barrel but that’s it
You might find yourself with another career if you keep making these. Seriously, it looks like a ton of fun and it all looks so well thought out. I can tell you take pride in your work and you don’t settle. Again, my compliments.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
Hot Threads
-
Talk, to, me about Insta pots, please.
- Started by forktender
- Replies: 51
- General Discussion
-
What went wrong?
- Started by Robert3750
- Replies: 32
- Pork
-
Thermometer - Which is best?
- Started by Kev81
- Replies: 20
- General Discussion
-
Grinding deer meat, die size?
- Started by chef k-dude
- Replies: 19
- General Discussion
