• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Need some help please

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

lion1956

Newbie
Joined
Aug 13, 2015
Messages
5
Reaction score
10
Just started smoking meat last week, I bought a Master Chef vertical smoker from Canadian Tire, my problem is controlling the temperature, it is way to hot, up to 350 degrees, the smoker has only one damper at the back, should I open it all the way?  I'm at the point where I have to prop the smoker door open a little, can I drill more holes in the smoker?
 
I do not know your smoker, is it a stick burner or propane?  More air on fire means more heat
 
I would open the damper all the way then. Make sure the knob on smoker is lowest it can be.
 
As I said it is a propane smoker with a wood chip pan, I used wood pellets this time and produced lots of smoke, maybe I used to many wood pellets also added a few wood chips
 
You want ninja smoke, smoke that can barely be seen.  If you have heave white smoke the you have way to much.  
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky