Need advice on a smoker build

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

cohoho

Newbie
Original poster
Nov 16, 2013
26
10
Terrace B.C.
I got this Foster blast chiller it is stainless steel inside and out I was worried about the insolation inside so I phoned the company they told me the insolation is ridged board polyurothain and if no open flame was touching it I should be good for temps. To 300 to 350 F. There is no insolation showing on the inside it is all sandwiched between the stainless do I need to worry about it leaching or should I be able to go ahead with this build? Any help would be great thanks.
 
It is awesome but if I have to rip it apart and take out all the insolation it will not be worth it for me so I sure hope I can use it like it is it will make one hell of a smoker!!
 
Maybe a cold smoker ?, I really don't think that type insulation will hold up in a RF or SF type smoker. You will have some hot spots, especially where the FB connects to the CC, You sure don't want that stuff melting.        On insulated we use mineral wool.

Gary
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky