skuuzmeplease
Fire Starter
The doors are now on and pretty tight but some tweeking will need to be done to make the smoke stay inside.
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
My first reverse flow trailer build
- Thread starter skuuzmeplease
- Start date
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
The doors are now on and pretty tight but some tweeking will need to be done to make the smoke stay inside.
skuuzmeplease
Fire Starter
I also got the second smoker/warmer stack on.
skuuzmeplease
Fire Starter
I am not going with the usual hanging counter weight for the doors because i would not have been able to have the warmer box due to the interference of the weights.I am going to try an alternative method of using garage door springs.
Last edited:
skuuzmeplease
Fire Starter
It has been a bit since my last post.Life got busy.Made the shelves for inside.
skuuzmeplease
Fire Starter
I have had to make a change in my trailer because of the weight.The axle was a 3500lb without brakes so you could really feel it pushing me.I found this old horse trailer for cheap replaced the suspension with new springs shackles and installed new brakes and now this trailer has an 8000lb capacity.I basically left the old trailer frame attached to the smoker since it was the foundation and mostly welded to everything.
skuuzmeplease
Fire Starter
i have a lot of space up front and need counter balance or tongue weight so i decided to make a Santa Maria style grill.i purchased new 1/4 inch plate for this.
skuuzmeplease
Fire Starter
since there was no room for counter balance arms i went with garage door spring and they work great!
skuuzmeplease
Fire Starter
Ready to grind of surface rust and paint
still have to finish the fender shelves and enclose the side with some tin.
still have to finish the fender shelves and enclose the side with some tin.
skuuzmeplease
Fire Starter
Thanks
i am very happy with my results
i am very happy with my results
Very nice build...
What a great build.. Awesome job.. What do you estimate the final cost?
skuuzmeplease
Fire Starter
Around $3500.00 Canadian for materials of which most i purchased from a guy on kijji for dirt cheap.
aussiebazza
Smoke Blower
Looks absolutely awesome!!
Bazza
Bazza
essexsmoker
Smoke Blower
Awesome build. :thumbup:
skuuzmeplease
Fire Starter
Thanks for the kind words
I cant wait to fire it up.
I cant wait to fire it up.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
- Featured
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.
© 2004-2026 SmokingMeatForums.com
