My CG grease catcher mod

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

backyardsmokin

Meat Mopper
Original poster
Jun 2, 2011
233
14
Castle Rock, CO
I always try to place a pan under my food it is not always possible and that idea of the small veggie tin can is not enough on long smokes.  I found this out when I did 2 butts and had to switch out the can 4 times.

With that in the past, I decides to come up with a way to have the grease go into a larger container and below is my working idea ( sorry for the bad camera shot).

9fe0e2ff_DSC_0057.jpg


I used a  funnel from Target and chopped the top 3/4 inch off of it, and a piece of 5/8 inch tubing that I got at Lowes to pour into a coffee can.  I also found that the fullen is a perfect lenght to pour into a milk carton w/o the tubing.

All in all it was less that $2 for everything to make this work.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky