• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Mold in WSM

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

ron50

Master of the Pit
OTBS Member
SMF Premier Member
Joined
May 14, 2007
Messages
2,375
Reaction score
189
Location
FL
Went out to check my smoker to make sure it was ready for my Thanksgiving Day bird on Thursday. Unfortunately when I removed the aluminum door I noticed some mold on the inside of the door as well as some charcoal that I have left in the bottom.

The top half looks good and so do the cooking grates.

It's been a very rainy summer and fall here and I think that created the issue. It the first time in the 3 years I've owned it that I've had this problem.

I read several threads on the proper way to clean it. Cleaning it then heating it or vice versa and I'm looking for opinions.

My wife just wants to spray the entire interior with a bleach and water solution.

Suggestions? Thanks.
 
Works in both directions, burn out first and all the mold is dried up and easy to wash out, wash first maybe a little more scrubbing but burn out / season again.
 
When my 14 got water in the bottom , I hosed it out first , and wiped with a rag .
Then fully lit ring of charcoal . It settled in at 350 . That was first thing in the morning . I went out around 8 pm to put it away , and it was still going at 350 ! Lol .
Anyway , the burn out did the trick for me . No scrubbing or abrasives .
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky