• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

maverick problems

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

tommy c

Meat Mopper
OTBS Member
Joined
Jun 23, 2006
Messages
213
Reaction score
12
Location
Wisconsin
I cant get the HHH to clear on my maverick. My temp probe on my smoker says 250. Any ideas as to why I cant clear this on the digital?
 
Sounds symptomatic of a bad probe wire. It may have gotten wet (which may clear up as it drys out), kinked, or burnt. :( A new probe lead usually fixes the problem.

I don't have that thermometer but it could be as simple as low batteries.
 
Yup, that sounds like a trashed probe. I keep a couple spares on hand for just that situation.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky