• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

LSG 20X42

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Rifleman1384

Newbie
Joined
Sep 28, 2026
Messages
3
Reaction score
5
Ok it's here but I'm a litle late posting so here goes. I'm new here and really like all of the content and willingness to share information.
Ordered June 24, I paid 1/2 down
I added the stainless shelves front and side, stainless grates, hooks for hanging the grates, 8 inch wheels, stainless trim kit, I was able to pay the difference and get the new stainless deflector plate that now comes with the sear plate in stainless, the grate frame, probe kit, charcoal basket.

Went into production about 8 weeks later

Completed and ready for shipment or pickup Oct 9

I drove down and picked it up on Oct 16. and of course left with a few extras, BBQ Delight Pellets, hickory and oak wood chips Touch-up Paint. Yes I believe it weights every bit of the 450lbs advertised.

Wiped and cleaned it all up
I did the burn in using pellets from Sam's

So now this is a FULL-ON passion and addiction!!

A couple things for those that are considering one: the 8 inch wheels make moving it really easy, I can move it from my garage through my shop to the porch on my shop very easy, it does go through a standard 3.0 door even with the hooks. The stainless grates are a must in my opinion. One thing the cooking surface is very smooth and easy to clean, prep and season. I do recommend that you turn these over and de-burr them, the edges around the slots are pretty rough and will almost shred anything you are using to clean. No big deal just wanted to mention it. I do really like the new stainless deflector plate. I haven't seared anything yet but I do like the idea and I think it will work just fine. The hooks on the rear really don't work that well for the stainless grates, the hooks are just a little to big for the slots in the stainless grates, it will hold one but kinda tight to get it on the hooks, getting both is a no go. They are long enough extending for the back of the smoker but too tall to fit in the slots well.

My overall experience was great, eveyone was nice to work with. Nicole was helpful and easy to work with. I did not call and bug them during the process. They were very clear upon ordering it that they would be "radio silent" and I would not hear from them till it went into production. We talked when it went into production because my plan depending on with and life I wanted to pick it up instead of shipping it. That all worked out and eventhough with driving from North Central Arkansas with gas and staying over the night it was slighty less than shipping. Anyway I'll try and attach a couple of photos but since I'm new I may not be able to or I'll screw it up.

BTW, the emblem was not from LoneStar, those are kinda expensive. I did the design and my daughter had that made by someone on ETSY.
 

Attachments

  • LSG Loaded Up.jpg
    LSG Loaded Up.jpg
    84.8 KB · Views: 0
  • LSG Home (1).jpg
    LSG Home (1).jpg
    67.1 KB · Views: 0
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky