• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

lang 60

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

bbq ron

Smoke Blower
Joined
Aug 13, 2008
Messages
83
Reaction score
10
Location
missouri
when i power wash my lang, i get a lot of water in the fire box through the oven vents. what is an easy way to get it out if there is one.
thanks
 
Others have stated that they have a few holes in the bottom of their fireboxes. If that is the case you may want to drill a drain hole or two.
 
The vaccum sounds pretty easy but if you want drill a hole about 1 1/2" and put in a pet **** and then you can just drain it as you want to. You know the big brass fitting with a handle.
 
When I hose out my offset I do it while it is hot and there's a fire in the firebox. I just build a bigger fire and it dries out from the heat.
 
Why not just start a fire in it and boil it out???? Please... someone correct me if this is a bad idea, cause ive done it a time or two and dont want to ruin my smoker.
 
Just pick it up, turn it upside down and shake it a few times...
biggrin.gif
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky