• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

is this tank usable or too rusty

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Joined
Feb 16, 2016
Messages
1
Reaction score
10
hi guys iv never built a smoker so im not totally sure but i found this tank and i am wondering if its too rusty to use or if it can still be used for an off set smoker. owner says it has some small holes here and there, but i can weld them closed. basically if its rusted to the point of having some small holes, is it trash or can i still build a good sturdy smoker with some welding repairs. any opinions?

 
If it were me I would pass and look for a better one. If it has holes rusted in it its to far gone I would think
 
It may very well be beyond working with. If you want to give it a try, build a good smokey fire inside and look for escaping smoke.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky