Inkbird universal adapter for WSM

[CelticT12]

Hi all ,just got the ink bird temp controller + the ink bird universal adapter for the wsm.
The adapter does not line up directly with the hole on the wsm at all,is this the way is meant to be?

 

[sandyut]

pics and model number? havent seen these yet

 

[CelticT12]

pics and model number? havent seen these yet

Thanks,I got this ,part# 64ZQ5TT

 

[sandyut]

that doesnt pull anything up on the inkbird site. do you have link and or pics?

 

[JckDanls 07]

that doesnt pull anything up on the inkbird site. do you have link and or pics?

Yea... No results from a Google search ether

 

[Astralogics]

I'm thinking they meant this bowl adapter?

Edit: Product number checks out
ASIN: B0C64ZQ5TT

 

[normanaj]

C CelticT12 Is this it?

https://www.amazon.com/Temperature-Controller-Universal-Bowl-Adaptor/dp/B0D8J76DWF?crid=3VTK37EREQD67&dib=eyJ2IjoiMSJ9.gpKHO3gF0jxcxFPaNcmQmIbpfVQ7gcMX_QOE50Qed8M.nLsaWGE1Vq1QomshFePy9GMHPwMwgdIWC2Vr3NQ28Gg&dib_tag=se&keywords=inkbird+universal+bowl+adaptor&qid=1741205572&sprefix=inkbird+universal+%2Caps%2C317&sr=8-2

 

[sandyut]

C CelticT12 can you post pics of what doesnt line up? I had a WSM that I out an bbq guru product on, I have vague recollections about it.

 

[normanaj]

C CelticT12 can you post pics of what doesnt line up? I had a WSM that I out an bbq guru product on, I have vague recollections about it.

If what I think he has this would be the part that doesn't fit.I can't see how it would fit a curved bowl.

 

[sandyut]

If what I think he has this would be the part that doesn't fit.I can't see how it would fit a curved bowl.

yeah, im trying to remember how the bbq guru adapter installed. I think it went in the inside with the port sticking through a vent hole?? the adapter doesn't need to be rounded per say.

 

[CelticT12]

Yea... No results from a Google search ether

Here ya go

 

[CelticT12]

C CelticT12 can you post pics of what doesnt line up? I had a WSM that I out an bbq guru product on, I have vague recollections about it.

C CelticT12 Is this it?

https://www.amazon.com/Temperature-Controller-Universal-Bowl-Adaptor/dp/B0D8J76DWF?crid=3VTK37EREQD67&dib=eyJ2IjoiMSJ9.gpKHO3gF0jxcxFPaNcmQmIbpfVQ7gcMX_QOE50Qed8M.nLsaWGE1Vq1QomshFePy9GMHPwMwgdIWC2Vr3NQ28Gg&dib_tag=se&keywords=inkbird+universal+bowl+adaptor&qid=1741205572&sprefix=inkbird+universal+%2Caps%2C317&sr=8-2

C CelticT12 Is this it?

https://www.amazon.com/Temperature-Controller-Universal-Bowl-Adaptor/dp/B0D8J76DWF?crid=3VTK37EREQD67&dib=eyJ2IjoiMSJ9.gpKHO3gF0jxcxFPaNcmQmIbpfVQ7gcMX_QOE50Qed8M.nLsaWGE1Vq1QomshFePy9GMHPwMwgdIWC2Vr3NQ28Gg&dib_tag=se&keywords=inkbird+universal+bowl+adaptor&qid=1741205572&sprefix=inkbird+universal+%2Caps%2C317&sr=8-2

Normanaj,yes that's it,its not that it doesn't sit flush,it does,it's just the intake on the adapter doesn't line up directly with the hole on the smoker,I'm not even sure if it's a problem, maybe it's designed like that to deflect a direct blast of air?.

 

[sandyut]

maybe post a pic of it on the WSM. I think the bbq guru one stuck thru the WSM vent hole and a bolt went thru another with a big washer or something. been too many years. It wasnt highly engineered but it worked great

 

[sandyut]

putting a control on a WSM is magic! is this one doesnt work out check out the bbq guru stuff. might be a little more $$ but they work great. the partyq I had was the cheapest one they made and ran on AA batteries. They stopped making it but I loved it. simple and solid. even survived a few rain storms.

 

[CelticT12]

putting a control on a WSM is magic! is this one doesnt work out check out the bbq guru stuff. might be a little more $$ but they work great. the partyq I had was the cheapest one they made and ran on AA batteries. They stopped making it but I loved it. simple and solid. even survived a few rain storms.

Thanks,going to do a dummy run over the weekend, see how it goes.

 

[BrianGSDTexoma]

yeah, im trying to remember how the bbq guru adapter installed. I think it went in the inside with the port sticking through a vent hole?? the adapter doesn't need to be rounded per say.

I like how to inside of the Guru has the air vent pointed down toward the bottom. I rednecked the InkBird to that. I hope the new style InkBird works better than the older ones.

Connecting the Inkbird BBQ Temperature Controller to WSM

Connecting the @Inkbirdbbq Temperature Controller to WSM. Hoping someone has done this. I have the adapter from the BBQ Guru attached to the WSM. Would to just leave that on and connect hose to that adapter somehow? I like the way it forces the air down. Is there some kind of adapter that...

www.smokingmeatforums.com