• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Horizontal UDS Build w/ QVIEW

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

enterprise

Fire Starter
Joined
Apr 17, 2009
Messages
55
Reaction score
10
Location
Eastern NE
This is the mock stage before the big burn out. It was an oil and a grease barrel. I did not have access to a welder so I just bolted it together. It will be taken apart burned out, cleaned, and the put back together with all the little things attached.
4dcd5b6c_vbattach24859.jpg

8ad71603_vbattach24860.jpg

e09c72bd_vbattach24861.jpg

d4bd957e_vbattach24862.jpg

bab82cf7_vbattach24863.jpg
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky