• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

HiGHLAND CHIMNEY MOD

noshuz

Newbie
20
10
Joined Jul 7, 2016
Hey Folks!

  I pulled the trigger in my new toy yesterday! I'm starting the assembly and mods. While I was admiring the chimney extension I just did I realized that it was galvanized duct material I just installed! I know Its tabou for grates etc. but is this going to be a problem? I've seen similar pipe on YouTube videos so I didn't think twice about until now.

 

paul6

Meat Mopper
SMF Premier Member
272
19
Joined Jun 13, 2015
I used the exact same material a year ago and am still kicking . I think as long as it is not in contact with the meat your fine . I did paint mine with high heat paint and it has not rusted .
 

noshuz

Newbie
20
10
Joined Jul 7, 2016
Thanks Paul. Ya was thinking the same thing. That and the fact that anything I ingested during the 70's didn't kill me either! 
 
 

bauchjw

Master of the Pit
1,087
198
Joined Aug 3, 2015
I know a lot of people do use it, but I've read bad things if it gets heated past a certain point releasing bad stuff. Not trying to be a downer, but my wife is anxious about this kind of stuff. . . So now I have to be. I had to order ones not galvanized from my local hardware to do my mods, they are mat black. The other option I've read about other people doing here, with galvanized bolts used in mods, is burning it off. I think it's a personal thing though and life will kill you one way or another. . . As I sip a beer.
 

crankybuzzard

Smoking Guru
Staff member
Moderator
OTBS Member
SMF Premier Member
5,251
2,108
Joined Jan 4, 2014
As long as you run at normal smoking temps you SHOULDN'T have a problem.  I say shouldn't because we all know that things can happen.

If you want good piece of mind, get one that isn't coated.  Personally, I'd use it and make sure my temps don't exceed 250-300.
 

noshuz

Newbie
20
10
Joined Jul 7, 2016
Since we're only talking about 4-6 dollar component I'll probably replace it with aluminum eventually. Some say that they chose not to use the extension it so I'll wait and see.

  Thanks Folks!
 

paul6

Meat Mopper
SMF Premier Member
272
19
Joined Jun 13, 2015
Ithink the extension makes a difference , also did you put on the gasket sets ?
 

noshuz

Newbie
20
10
Joined Jul 7, 2016
Hey Paul,

  They're do in Friday. I've already got the RTV for the FB connections. Next purchase is thermometers. I should have this unit decked out with all of the standard mods for about $50 bucks. The rest is up to me and learning this new art!
 

Latest posts

Hot Threads

Top Bottom
  AdBlock Detected

We noticed that you're using an ad-blocker, which could block some critical website features. For the best possible site experience please take a moment to disable your AdBlocker.