Great job on the mods. Thanks for the pictures. Lots of people ask about the needle valve mod, I just did mine last week. I know the Bayou Classic is one way to do it, but it can all be done at the local hardware store. One thing I found is that many of the standard grill regulators are 3/8 pipe thread.Our gosm is 1/4. So you'll need a 1/4" needle valve (which is compression threads). You then will need to adapt compression to pipe thread on either end. My best move was taking in a picture to the hardware store. Well, once again I can't figure out how to use my pictures,but these attachments are the pictures I used to make mine. Thanks to Rodbuilder.
dmack
http://www.smokingmeatforums.com/for...9&d=1194351632
http://www.smokingmeatforums.com/for...0&d=1194352058
dmack
http://www.smokingmeatforums.com/for...9&d=1194351632
http://www.smokingmeatforums.com/for...0&d=1194352058
