GOSM 3405BGW Picture

[av8tor]

Would someone please post a picture of their Wide Body GOSM smoker 3405BGW. On Wal-Marts page looks like they are showing the same model between the two sizes.

Thanks in advance.

 

[blacklab]

Here I'll give it a try

 

[bbq bubba]

It is the same.....just fatter!!

 

[white cloud]

Isn't that a GOWSOME/GOLIATH

 

[philthysmoker]

same height,same depth, 8in wider, so 24 in wide instead of 16, besides that they are the same

 

[smokeys my pet]

Here are some with a couple easy mods. The Mods are talked about on another post somewhere!!!!!!!

 

[av8tor]

Smokey can you explain the shut off valve mod more please?

Oh and thanks to all.

 

[rw willy]

I like the way you styled your side vents. I've been tossing a mod around. But wasn't looking forward to taking a 3 inch hole saw to the side of my GOSM. I won't mind 4, 1/2 inchers.

 

[smokeys my pet]

It is inline before the control valve that is on the front of the smoker. When you have the smoker set to low then you can close down the ball valve I put on to restrict gas flow more to get less of flame therfore less heat and lower temps in the smoker. I can readily hold 140* to do jerky and fish so I really like it!!!!!!!!!!!Hope this helps???????

 

[av8tor]

Yes thanks, that was I thought you were trying to do. Does the flame stay lit OK running that low?

 

[jbee-smokin]

I saved your picture of the gas valve mods. I am going to try this because I wasn't to be able to smoke summer sausage and this should allow me to lower the temp to within a suitable range. Have you experienced any flame blowouts due to lowering the flame?
JB

 

[smokeys my pet]

Never had any yet but I have not used on a very windy day either. If you have a wind block I believe you will be fine!!!!!!