I picked up a nine and a half pounder today so its on soon, was gonna do it tomorrow but didn't have luck with the dome lid i bought so i could have two shelves. how long will a nine lber take roughly?
It depends on a number of factors, but I'd give yourself at least 12 hours.I picked up a nine and a half pounder today so its on soon, was gonna do it tomorrow but didn't have luck with the dome lid i bought so i could have two shelves. how long will a nine lber take roughly?
I think JIR said it well. The only time I open the smoker is to take a picture for the group. Otherwise it is down for the temp count - however long that may be.With brisket I almost neverspray, not unless I have to open the smoker for something else. I don't want to dump my temps, and if your peeking you ain't smokin! lol
Brisket runs about 1 1/2 to 2 hrs. a pound and you absolutely do not want to rush it. Now I am assuming your Costco trims all the fat off like mine does, so make sure you have a good thermometer and are keeping the temps between 200° & 225°. You might want to also drape some bacon across the top of the brisket to help it stay moist. For your brisket I would allow 10 hrs. from time put on the smoker to slicing, so roughly 8 hrs. cooking and then another 1-2 hrs. to rest foiled in a cooler.I gotta question for you folks. Never smoked a brisket yet, and before I read about the "packers cut" I bought a "flat cut" at Costco. I'm having some friends over for dinner next week, promised ribs (which I've made before, smoke for about 5 hrs at 220-225 or so). The brisket is about 4 1/2 lbs, so I'm thinking it should take just over 5 1/2 hours.
Thought I'd start the smoker with the brisket, then add the ribs later on.
Anyone have any reason why this wouldn't work out? I thought it would be nice to have something besides the ribs. There are plenty of suggestions on here for marinades and rubs etc.
Thanks!
Thanks for the suggestions. I didn't think the brisket would take quite that long, I was reading 1 to 1 1/4 hours per pound? But as you said I can start it all early, monitor the temps and then let it sit for a while.Brisket runs about 1 1/2 to 2 hrs. a pound and you absolutely do not want to rush it. Now I am assuming your Costco trims all the fat off like mine does, so make sure you have a good thermometer and are keeping the temps between 200° & 225°. You might want to also drape some bacon across the top of the brisket to help it stay moist. For your brisket I would allow 10 hrs. from time put on the smoker to slicing, so roughly 8 hrs. cooking and then another 1-2 hrs. to rest foiled in a cooler.
Since the brisket needs the cooler time plan your ribs to finish up in 5-6 hrs. from time on smoker to time to eat. If the ribs finsish a little early they can also be foiled and put in the cooler for a bit as well.
It's always better to have the food done and waiting in the cooler, than trying to cut it too close and having to wait an hour or so with all your guests. Hope it all turns out good!![]()
All good questions.Thanks for the suggestions. I didn't think the brisket would take quite that long, I was reading 1 to 1 1/4 hours per pound? But as you said I can start it all early, monitor the temps and then let it sit for a while.
Yeah the brisket has most fat trimmed off, and I also read elsewhere about putting bacon across the top -- is that just plain ol' bacon, or the thick stuff, or does it matter?
One question -- about putting the brisket and ribs the "cooler" -- I've always let stuff sit a bit after cooking it, and this may be a dumb question, but why in the cooler, and should I be adding ice to the cooler? If the brisket is supposed to rest for 1-2 hours -- it won't be warm by the time it's served? I must be missing something...![]()